We - LEYBOLD Vacuum GmbH - herewith declare that operation of the incomplete machine defined below, is not
permissible until it has been determined that the machine into which this incomplete machine is to be installed,
meets the regulations of the EEC Directive on Machinery.
When using the appropriate Leybold accessories, e.g. connector lines and when powering the pump with the spe-
cified Leybold frequency converters, the protection level prescribed in the EMC Guidelines will be attained.
Designation: Turbomolecular pump MAG
digital
LINE
Applied harmonized standards:
■ EN 1012 – 2 1996
GA05141_0702 - 09/2004
104
Leybold Vacuum GmbH
Bonner Straße 498 (Bayenthal)
D-50968 Köln
Tel.: ++49 (0)221 347-0
Fax: ++49 (0)221 347-1250
documentation@leybold.com
www.leybold.com
Part Nos.:
400000Vxxxx
400003V0002
400006V0071
400020Vxxxx
400021Vxxxx
400026Vxxxx
400027Vxxxx
400030Vxxxx
400081Vxxxx
400100Vxxxx
400110Vxxxx
x = 0 to 9
Models:
MAG W 830 C
MAG W 1300 C
MAG (W) 1500 CT
MAG W 2200 C
MAG W 2800 C(T)
MAG W 3200 CT
MAG W 830
MAG W 1300
MAG W 2200
MAG W 2800
Cologne, Sept. 14, 2004
—————————————————————
Ralf Adamietz
Head of Design
EC Manufacturer’s Declaration
in the spirit of Appendix IIb to the 98/37/EG Machinery Guidelines
Cologne, Sept. 14, 2004
—————————————————————
Marcus Eisenhuth
Vice-President
Head of Product Development
To Next Page
Loading...
