LEYBOLD MAG Series User Manual

GA05141_0702 - 09/2004
21
Description
1.7 Ordering data
Part No.
Pumps see Table “pumps”
Seal Kit DN 250 metal 200 07 901
Seal Kit metal for other flanges on request
MAG.DRIVE
digital
converter 400035V0011
Plug-in control 121 36
Connecting cables, converter — pump see Fig. 8
19“ installation frame 161 00
Blind plate 1/4 19“ 3 HE 161 02
Connector for hardware interface from 25 pins to 50 pins on request
Purge vent valve 121 33
Purge vent Tee 400153V0002
Screws M 10 x 50 200 15 752
Screw quality 12.9 according to EN ISO 898-1 with coating
0,2 % yield strength > 1080 N/mm2
Washers 200 07 833
Nuts 211 28 117
Collar flange with snap ring DN 250 267 72

LEYBOLD MAG Series Specifications

General

Applications	Laboratory, medical, and industrial applications
Drive	Magnetic drive
Sealing	Hermetically sealed
Flow Rate	Varies depending on the model, ranging from a few liters per minute (LPM) to several tens of LPM. Consult specific model datasheets for precise values.
Max Pressure	Varies by model (typically up to 10 bar)
Power Supply	Typically available in various AC voltages (e.g., 115V, 230V) and frequencies (50/60 Hz)
Power Consumption	Varies depending on the model, ranging from a few watts to several hundred watts. Consult specific model datasheets for precise values.
Operating Temperature	Typically 0°C to +60°C
Weight	Varies depending on the model, ranging from a few kilograms to several kilograms. Consult specific model datasheets for precise values.
Dimensions	Varies depending on the model. Consult specific model datasheets for precise dimensions.
Materials	Stainless steel