LEYBOLD MAG Series User Manual

GA05141_0702 - 09/2004
105
Leybold Vacuum GmbH
Bonner Straße 498 (Bayenthal)
50968 Köln
Tel.: ++49 (0)221 347-0
Fax: ++49 (0)221 347-1250
documentation@leybold.com
v
acuum
www.leybold.com
EC Conformance Declaration
We, the Leybold Vacuum GmbH, declare herewith that the products listed below, in the embodiment which we
have placed on the market, comply with the applicable EC guidelines.
This declaration becomes invalid if modifications are made to the product without consultation with us.
Maintaining the EMC guideline assumes an EMC adapted installation of component within the plant or machine.
Test were run using a typical construction in a test assembly that conforms with the standards.
Time of the CE label (year): 2004
Designation of the products: Frequency converter / Plug-in control
Model: MAG.DRIVE
digital
Part No. 400035V0011 / 121 36
The products comply to the following guidelines:
■ EC Low-Voltage Equipment Guidelines (73/23/EWG and 93/68/EG
■ EC Directive on Electromagnetic Compatibility 89/336/EWG, 91/263/EWG, 92/31/EWG and 93/68/EWG
Related, harmonized standards:
■ EN 61010 - 1 2002
■ EN 61000-6-4 2001
■ EN 61000-6-2 2001
Cologne, Sept. 14, 2004
—————————————————————
Manfred Kieffer
Development Design
Cologne, Sept. 14, 2004
—————————————————————
Marcus Eisenhuth
Vice-President
Head of Product Development

LEYBOLD MAG Series Specifications

General

Applications	Laboratory, medical, and industrial applications
Drive	Magnetic drive
Sealing	Hermetically sealed
Flow Rate	Varies depending on the model, ranging from a few liters per minute (LPM) to several tens of LPM. Consult specific model datasheets for precise values.
Max Pressure	Varies by model (typically up to 10 bar)
Power Supply	Typically available in various AC voltages (e.g., 115V, 230V) and frequencies (50/60 Hz)
Power Consumption	Varies depending on the model, ranging from a few watts to several hundred watts. Consult specific model datasheets for precise values.
Operating Temperature	Typically 0°C to +60°C
Weight	Varies depending on the model, ranging from a few kilograms to several kilograms. Consult specific model datasheets for precise values.
Dimensions	Varies depending on the model. Consult specific model datasheets for precise dimensions.
Materials	Stainless steel