Warning
GA05141_0702 - 09/2004
94
Troubleshooting
5Troubleshooting
In case of a malfunction, the MAG will be braked and the first line of the
display shows
FAILURE
Malfunction messages can be cancelled once the pump has come to a
stop and after the malfunction has been rectified; do so with the STOP
function (button or remote control).
The MAG shall be stopped completely and the mains power cord
detached before you open the MAG.DRIVE
digital
. Since dangerous
voltages may nonetheless be encountered, the housing must be
opened only by a qualified electrician.
To Next Page
Loading...
