LEYBOLD MAG Series User Manual

GA05141_0702 - 09/2004
19
Description
Technical data (continued)
Purge gas
see Section 2.6
MAG.DRIVE
digital
Voltage range 200 - 240 V +10% -15%
Line supply frequency 50 / 60 Hz
Load
Stand-by approx. 100 W
Maximum heated pumps 1800 W
Maximum non-heated pumps 1100 W
Max. voltage motor 60 V
Maximum pump current 15 A rms
Internal main fuse 16 A
Rated braking capacity 200 kA
System fuse L or G characteristic
Maximum frequency 600 Hz
Load capability, relay output 42 V, 1 A
Temperature during operation 0-45 °C
Storage temperature - 10 °C to + 60 °C
Relative air humidity 95% (non condensing)
Overvoltage category II
Contamination level in accordance with EN 61010 2
Weight 10 kg
Degree of protection (EN 60529) IP20

LEYBOLD MAG Series Specifications

General

Applications	Laboratory, medical, and industrial applications
Drive	Magnetic drive
Sealing	Hermetically sealed
Flow Rate	Varies depending on the model, ranging from a few liters per minute (LPM) to several tens of LPM. Consult specific model datasheets for precise values.
Max Pressure	Varies by model (typically up to 10 bar)
Power Supply	Typically available in various AC voltages (e.g., 115V, 230V) and frequencies (50/60 Hz)
Power Consumption	Varies depending on the model, ranging from a few watts to several hundred watts. Consult specific model datasheets for precise values.
Operating Temperature	Typically 0°C to +60°C
Weight	Varies depending on the model, ranging from a few kilograms to several kilograms. Consult specific model datasheets for precise values.
Dimensions	Varies depending on the model. Consult specific model datasheets for precise dimensions.
Materials	Stainless steel