. LG Network Storage Web Menu Use (for LG Network Storage administrators)
10
③ Log in.
Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the
above procedures have been followed properly, the iSCSI Initiator will find
and list the information for the target (LG-NAS). Select the relevant target
name and press the “Log On . . .” and click “OK” from the pop-up window.
④ Check that the target has been connected as follows.
Target can be checked by going to Device administrator → DVD/CD-ROM
drive.
⑤ NAS built-in ODD can be accessed by using tools such as CyberLink
Power2Go.
To Next Page
