LG PREMTBB01 - Function Setting - Auto Cleaning; Function Setting - Automatic Setting for Robot Cleaning

24
OWNER’S INSTRUCTION
ENGLISH
OWNER’S INSTRUCTION
25
ENGLISH
Function setting - Automatic Setting for Robot Cleaning
Robot Cleaning is a function that a built-in cleaner performs a filter cleaning automatically when
air-conditioner runs for the scheduled hours.
It programs the robot cleaning function runs manually or automatically.
Press
B
button repeatedly until
X
icon is blinking.
Move to AUTO icon using
HI
button, and press
K
button to select the automatic robot clean-
ing function.
When returning to the manual robot cleaning, press
HI
button to move to MANUAL icon and
press
K
button to select the manual robot cleaning function.
Press
L
button to exit after setup.
 If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
 If Set button is not selected before you exit, the changes will not apply.
• Some products may not include robot cleaning function.
Function setting - Auto Cleaning
Auto cleaning is a function to remove moisture or mold after turning off the cooling system by
drying the inside of indoor unit.
Press
B
button repeatedly to select Auto cleaning in the menu.
J
icon will display and the current status of ENABLE or DISABLE icon will blink.
Move to ENABLE using
HI
button, and then ENABLE icon will blink. Press
K
button to set
the auto cleaning function.
When returning to DISABLE, press
HI
button to select DISABLE icon. And then press
K
but-
ton cancel the auto cleaning function.
Press
L
to exit after setup.
 If no button is selected for about 60 seconds after setup, it exits the setup mode automatically.
 If Set button is not selected before you exit, the changes will not apply.
• Some products may not include auto-drying function.
ENGLISH