8
OWNER’S INSTRUCTION
ENGLISH
OWNER’S INSTRUCTION
9
ENGLISH
button in the remote controller, and press
button to select heating.
- The initial temperature for heating is set at 30°C by default.
- The desired temperature can be reached by 1°C or 0.5°C depending on the type of Indoor Unit.
Press button to set the desired temperature above the indoor temperature.
- If the indoor temperature is set above the desired temperature, warm air will not blow out but
only fan will work instead. (Press
J button to see the indoor temperature.)
button during operation to cancel heating.
• The range of the desired temperature is 16°C~30°C for heating.
• Heating applies only to cooling/heating models.
Heating will not work in the cooling only models.
button to turn on the indoor.
Press
button during cooling and it will move to “Po” and start power cooling.
Some units run the power cooling after power breeze.
button during operation to cancel the power cooling and run the fan speed automati-
cally.
What is a power cooling?
Desired temperature: (actual temperature 18°C )
Fan speed: Power breeze
Breeze direction: cooling position
Running to cool down the indoor
temperature quickly.
Some units do not have power cooling function.
Standard Operation – Heating Mode
A warm breeze blows out to the room.
Standard Operation – Power Cooling
It cools off faster and more powerfully.
ENGLISH
To Next Page
Loading...
Need help?
General
