Liebert S600 - Chapter 1 Product Information; Product Features; Model Configurations

Vertiv|Liebert® S600 10kVA ~ 20kVA UPS | User Manual 11
Chapter 1 Product Information
S600 10~ 20kVA UPS is an intelligent online UPS system with sine wave output developed by Vertiv Co. The UPS
offers reliable and high-quality AC power to the precision instrument.
This chapter introduces the features, model configurations, appearance and components, operating principle, UPS state
and operation mode, and specifications of the UPS.
1.1 Features
The UPS features include:
• Output power factor is 1, which enhances the UPS load capacity.
• On-line double conversion efficiency up to 91% and ECO efficiency up to 94%, which provide more efficient
products for the customer.
• Product volume decreased by 30% compared with the previous generation; little space occupied, simple handling
and assembly.
• Capable of parallel connection to achieve up to 3 + 1 parallel redundant power
• High-frequency double conversion topology structure, with high input power factor, wide input voltage range,
and output immune to grid interference, thus adaptable to areas with unstable mains supply
• Full digital control platform and hardware design platform, which can adapt worse unstable mains supply and
load impact
• Support 12, 16, 20-block batteries (10kVA); 24, 32, 40-block batteries (20kVA). The long back-up model has a
built-in large power charger with 13A charging capacity to provide fast charging
• Provide programmable terminals with cascade protection, to protect the key devices for the customer when the
load is heavy
• Innovative design of the layout and the whole process greatly promote the reliability of the product; pass high
temperature humidity durability experiment test of 1000 hours
• Operation and display panel with colorful LCD to help you learn about the UPS operation state and operating
parameters. The LCD display will change according to the layout of the model
• Integrate Ethernet port, support HTTP protocol, and use the web browser to achieve the remote monitoring, no
extra monitoring software required
• Full configuration can achieve the functions such as Interlock, external temperature & humidity sensor, and
battery module automatic identification
• Capable of ECO power supply mode and smart sleep mode, which help you save energy to the maximum extent
1.2 Model Configuration
Table 1-1 Model Configurations
Model
Input
Output
Remark
10kVA
Three-Phase
Single phase
Common input configuration, split bypass
configuration
20kVA
Three-Phase
Single Phase
Common input configuration (default), split bypass
configuration