Liebert S600 - Technical Specifications

Vertiv|Liebert® S600 10kVA ~ 20kVA UPS | User Manual 17
1.6 Specifications
Table 1-2 Specifications
Item
Specifications
10kVA (3-in 1-out)
20kVA (3-in 1-out)
Input
Rated voltage
400vac 3-phase,4 wire
400Vac 3-Phase,4 wire
Volatge Range
176 -288VAC at 100% load; 100VAC - 288VAC at 50% load
Rated Frequency
50Hz/60Hz
Frequency Range
40Hz ~ 70Hz
Power factor
≥ 0.95 at full load
Input Phase Reversal
Yes
NO
Output
Rated power
10KVA/10kW
20KVA/20kW
Voltage
220Vac/230Vac/240Vac (Single phase output)
Frequency synchronization
range
Rated frequency±3Hz. Configurable range: ±0.5Hz ~ ±5Hz
Rated Power Factor
Unity
Crest Factor
3 : 1
Voltage harmonic
distortion
< 2% (linear load)
Voltage Regulation
± 2%
Dynamic response
recovery time
60ms
40ms
Isolation transformer
Inbuilt at UPS Output
Inverter Overload
Capability the utility mode
At 25°C: 105% ~ 125%- 5min; 125% ~ 150%-1min; 150%- more
than 200ms
Inverter Overload
Capability the battery
mode
At 25°C :105% ~125%-60~ 30 s; >125%- more than 200ms