Liebert S600 - Page 18

Vertiv|Liebert® S600 10kVA ~ 20kVA UPS | User Manual 18
Item
Specifications
10kVA (3-in 1-out)
20kVA (3-in 1-out)
Bypass
Bypass Voltage range
Upper limit: +10%, +15% or +20%; default: +20%
Lower limit: -10%, -20%, -30% or -40%; default: -40%
Separate Bypass
Yes
Manual Bypass
Inbuilt
Efficiency
ECO Mode
> 94%
> 94%
Mains efficiency (RL)
> 91%
> 91%
Inverter
Efficiency(DC-AC)
88%
88%
Battery
Type
Sealed, lead-acid, Tubular,LI-ION
No's of Batteries
12
(1)
, 16, 20; 16 by default
24
(1)
, 32, 40; 32 by default
Rated Voltage
144Vdc ~ 240Vdc
288Vdc ~ 480Vdc
Battery Fuse Disconnector
Inbuilt
Battery charging capacity
8A
13A
Transfer Time
Mains - Battery
0ms
Inverter- Bypass
Synchronous transfer: ≤0ms
Asynchronous transfer (default): ≤20ms
UPS Parallel Numbers
4
Noise
< 65dB
Panel display mode
Graphical LCD display
Ambient
Conditions
Operating
0°C ~ 50°C
(2)
temperature
Storage
-40°C ~ +70°C (battery excluded); -25°C ~ +55°C (battery
included)
temperature
Relative
5%RH ~ 95%RH, non-condensing
humidity
Altitude
≤3000m; derating when higher than 3000m
Mechanical
Parameters
W*D*H (mm)
550 X 620 X 700
550 X 620 X700
Weight (Kg)
138
158
Ventilation
Forced -air cooled
Ingress protection
IP21
Color
Powder coated Black Texture finish
Cable entry
Bottom
Note: (1) UPS power will derate to 70% of the total capacity
(2) UPS power will derate to 80% at 40 deg and 70% at 50 deg