To Next PageTo Next Page
Need help?Do you have a question about the Liebert S600 and is the answer not in the manual?
General| Product Type | Uninterruptible Power Supply (UPS) |
|---|---|
| Frequency | 50/60 Hz |
| Form Factor | Tower |
| Topology | Double Conversion Online |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Communication Interface | USB |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Key features of the Liebert S600 UPS, including power factor and efficiency.
Available model configurations for the Liebert S600 UPS (10kVA and 20kVA).
Physical appearance and internal components of the UPS, including front and rear views.
Functional flow and working principle of the Liebert S600 UPS system.
various operating states and modes of the UPS, like Normal, Bypass, and Battery.
Detailed technical specifications for the 10kVA and 20kVA UPS models.
Procedures for unpacking the UPS and inspecting it for transportation damage.
Lists and describes the accessories supplied with the UPS unit.
Site selection, environmental requirements, and preparations for UPS installation.
Guidance on selecting appropriate power cables based on UPS specs and load.
Instructions for safely connecting the battery cables to the UPS system.
Steps for commissioning a single UPS unit, including start-up and configuration.
Overview of features and benefits of parallel UPS systems.
Essential requirements for setting up parallel UPS systems correctly.
Instructions for connecting power and parallel communication cables for UPS systems.
Procedures for commissioning parallel UPS systems, including checks and settings.
Guidance for installing and commissioning dual bus UPS systems, including LBS.
Overview of the UPS operation panel, including LCD, keys, and indicators.
Step-by-step guidance for initial start-up and basic parameter setup of the UPS.
Explains the hierarchy of the UPS LCD menu system.
Details the different screen types displayed on the UPS LCD interface.
Lists and explains system prompts for user confirmation or alerts.
Lists and explains UPS alarm messages for user alerts and troubleshooting.
Instructions for starting up the UPS after installation and commissioning.
Details on transferring the UPS between operating modes like Normal, Bypass, and Battery.
Explains the REPO (Remote Emergency Power Off) function for emergency shutdown.
Configuration of the auto restart feature for UPS power recovery.
How to select the display language for the UPS LCD menus.
Procedures for changing the system date and time on the UPS.
Steps for changing the user password for UPS access and configuration.
Describes installing intelligent cards (SIC, RDU-SIC) for UPS network communication.
Details on connecting dry contact ports for alarm and control signals.
Instructions for connecting USB, serial, control, and Ethernet ports for communication.
Procedures for maintaining the UPS fans and batteries to ensure longevity.
Guidelines for cleaning the UPS and checking its operational status and alarms.
Procedures for checking the overall functionality of the UPS, including indicators and LCD.
Lists optional accessories and details communication cables for the UPS system.
