Figure 5-1 Turning on UPS
In Inverter mode, press and hold the power button. If the bypass is normal, the interface shown in Figure 5-2 will
appear. Select 'To the Bypass' and click OK to transfer the UPS to Bypass mode; select 'Turn off UPS' and click
OK to turn off the UPS.
Figure 5-2 Bypass Normal Interface
In Inverter mode, press and hold the power button. If the bypass is abnormal, then the interface shown in Figure 5-3
will appear, select 'YES' to shut down the UPS output.
To Next Page
Loading...
