Lifesize Icon Guide 4
System Access and Passwords
SIP BROWSER: If you are using SIP servers, configure your Lifesize system to
use SIP in Preferences > SIP Registrar 1 and Preferences > SIP
Registrar 2.
Help
Calls, audio, and
video
BROWSER: Configure call, audio, and video preferences:
• Preferences > Calls
• Preferences > Audio
• Preferences > Video
Help
Firewall Configure your video system for firewall traversal. Configuring Your
Firewall
Automatic
provisioning
Enable your video system to discover a provisioning server and to
configure itself with settings that are specified on the server.
Provisioning Your
Icon through
UVC ClearSea
DHCP By default, DHCP is enabled on Lifesize systems. If you disable DHCP,
you must specify the system’s IP address, subnet mask, and default
gateway.
BROWSER: Preferences > Network
REMOTE CONTROL: Select > and enter the passcode (by default,
1234) to access .
Lifesize Icon
Installation Guide
Remote control Select > and enter the passcode (by default, 1234) to access a limited set of
administrator functions from the video system’s display:
Enable or disable DHCP. When DHCP is disabled, you can set the IP address, netmask,
default gateway, and address of the static DNS server.
Reset network settings.
Reset all settings.
Revert to the alternate software version and reset all settings to their default values.
Browser Open a web browser and enter the IP address of the Lifesize system. Sign in with administrator
credentials. The default username and password are admin.
The IP address of the system appears in on the main screen.
Lifesize Cloud users: select > to view the IP address.
By default, remote management of a Lifesize video system over HTTP is enabled at
Preferences > Security > Enable Remote Management Over HTTP.
CAUTION: Disabling HTTP signs you out and prevents you from signing back in to the system.
SSH Sign in with administrator credentials in an SSH session and enter commands to manage your
Lifesize system remotely. The default username and password are admin. Read more at Icon
Video System API.
By default, remote management over SSH is enabled at Preferences > Security > Enable
SSH Access.
CAUTION: Disabling SSH prevents you from managing the system remotely over SSH.
UVC Manager With UVC Manager, administrators can manage your Lifesize video system and other video
systems across the enterprise.
Configuration Description Read More
To Next Page
Loading...
Need help?
General
