00
248083400-1 Rev 7
3-1
3 Unpacking, Inspecting
and Installation
Initial
Inspection
The instrument is thoroughly inspected and tested at the factory and is
ready for use upon receipt.
Unpacking It is presumed that when the shipment was received, the following took
place:
1. The shipping container was inspected for damage.
2. If the container was damaged, the shipper was notified
immediately.
3. The instrument was carefully inspected for broken parts,
scratches, dents and other damage before use,
even if the
container appeared undamaged, and
4. Any damages were reported to Lighthouse Technical Support at
800-945-5905 (USA Toll Free) or 541-770-5905 (Outside of
USA) before proceeding.
Verify the contents of the package against the Shipping List. If anything
appears to be missing, please contact your sales representative at
Lighthouse Worldwide Solutions immediately at 510-438-0500 (Sales).
To maintain your warranty, keep the undamaged shipping
container and all packing material for reshipment of the
instrument for annual calibration. Order replacement
containers and packing materials from Lighthouse directly,
or from a Lighthouse-authorized distributor.
To Next Page
Loading...
