Lighthouse Handheld 2016 - Connecting to an External Computer or Facility Management System

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
3-10
248083400-1 Rev 7
Connecting to an External Computer or Facility
Management System
The HANDHELD has the ability to be connected to the Lighthouse
Monitoring System (LMS), LMS Express or LMS XChange Data
Transfer Software to download its data.
By transferring the instrument’s data to the Lighthouse Monitoring
System (LMS) or a PC running LMS Express, historical data can be
stored externally for future reviewing and trending. LMS XChange
software can export data to a *.csv file for historical review.
Note:
The DATA port
can be used for the printer
or to connect HANDHELD
to an external computer. It
cannot be used to connect
to both at the same time.
1. To connect to the HANDHELD, insert the RJ45 end of the
HANDHELD data communications cable to the DATA port as
shown in Figure 3-13.
Figure 3-13 Connecting RJ45 Data Communications Cable
Note: LMS Express
allows you to upload data
from your HANDHELD;
LMS Express RT allows
you to also collect data in
real time.
2. Connect the other end of the data communication cable to your
Lighthouse Monitoring System or PC running LMS Express or
LMS XChange software.
Please refer to the LMS XChange, LMS Express or LMSNet manual
for additional information.