Operation
248083400-1 Rev 7
4-47
Data View
Buffer Screen
Data that is stored on the instrument is viewed in the Data Screen.
When the buffer has filled to its limit of 3000 records, the newest
records will overwrite the first records stored. The word “Records” on
the MAIN screen will have an asterisk (*) next to it to indicate that the
buffer has wrapped. When you go to the Data screen after the data has
wrapped, the first record viewed will be the most current record, which
will not necessarily be record #1.
If the Particle Volume is set to ft
3
, then the concentration data will
display and print in ft
3
. If the Particle Volume is set to m
3
or Liters (L),
then the concentration data will display and print in m
3
.
Press the DATA button on the MAIN screen to display the Data screen.
Depending on how the HANDHELD is configured, the data will
display in either raw data mode, or be normalized to ft
3
or m
3
. See
Figure 4-60 & Figure 4-61.
Figure 4-60 Data Screen - RAW Data
To Next Page
Loading...
