Lighthouse Handheld 2016 - Page 76

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-48
248083400-1 Rev 7
Scroll through the data using the UP and DOWN arrow buttons.
• The single arrow moves one record at a time.
Figure 4-61 Data Screen - Normalized data in ft
3
The Data screen displays the following information for each data
record.
Note:
When the buffer
has wrapped, the record
that is first displayed in the
Data screen is the first
record in the data buffer .
This may not be Rec#1.
If you press the single
down arrow button once,
the instrument will display
the last record in the data
buffer.
• Rec# - Identifies which record is currently viewed.
• *Recs - Displays how many records are currently stored in the
HANDHELD’s buffer. When there is an asterisk (*) next to the
word “Recs”, this means that the 3000 record data buffer has
wrapped. The basic concept is First In, First Out (FIFO).
• Size - Lists the channel sizes configured on the instrument.
• Diff#, Diff/ft3, Diff/m3 - Indicates that each channel size’s data is
displayed in differential mode. If a channel was disabled, then there
is a blank space in is column; # indicates raw counts; ft
3
and m
3
indicate normalized counts.
• Cuml#, Cuml/ft3, Cuml/m3 - Indicates that each channel size’s
data is displayed in cumulative mode. If a channel was disabled,
there will be a blank space in this column. # indicates raw counts
while ft
3
and m
3
indicate normalized counts.
• Loc - Indicates the location at which the data record was recorded.
The Location name listed is the alphanumeric label that was saved.
• Smpl - Indicates the Sample Time (HH:MM:SS) at which the data
record was sampled.
• Date - Indicates the instrument date on which the data was
recorded. The date will display in the format selected in the
configuration (MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/
DD).