Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-34
248083400-1 Rev 7
Note: If the first channel
is disabled and One
Channel mode is enabled,
the display and zoomed
data view will be blank.
One Channel mode only affects how data is displayed on the MAIN
screen. Refer to Figure 4-43.
Figure 4-43 Main Screen - One Channel Option Enabled
ONE SECOND OUTPUT
If One Second Output is enabled, the instrument’s settings reset to the
following.
Note:
One Second
Output disables Alarming.
• Mode: AUTO
• Cycles: Zero
• Sample Time: One second
Note: Changing any
setting (mode, sample
time, hold time, etc)
disables the One Second
Output.
• Hold Time: Zero seconds
• Cumulative/Differential: Cumulative (CUML)
• Raw/Normalized: Raw
When counting, the MAIN Screen will update continuously and data
will not be recorded to the data buffer.
To Next Page
Loading...
