Unpacking, Inspecting and Installation
248083400-1 Rev 7
3-3
• LMS Express software (standard), an analysis tool that allows the
user to:
1. Manually download data from the instrument
2. Save data for historical review
3. Have advanced reporting with standard reports and much more.
• LMS Express RT software (optional), an analysis tool that allows
the user to perform the following:
1. Download data from the instrument
2. Collect data real time
3. Save data for historical review
4. Have advanced reporting with standard reports
...and much more.
Please contact Lighthouse Worldwide Solutions at 800-945-5905 (USA
Toll Free) or 541-770-5905 (Outside of USA) for details.
Prepare
Instrument for
Use
Power Requirements
The power adapter input requirement is 100-240VAC, 50-60Hz, 1.25
Amps. Its output is +12VDC, 3A. A power cord and power adapter are
included with your HANDHELD 2016, 3016 or 5016.
To protect the instrument from voltage spikes, Lighthouse recommends
using protected power . Using an uninterruptible power supply (UPS)
when the HANDHELD is kept in a stationary location will help prevent
damage to the instrument or loss of data in the event of a power outage.
Install the Battery
The HANDHELD comes with a standard rechargeable battery. An
optional external battery charger is available; otherwise, the battery
recharges in the unit when the unit is plugged into AC power.
Install the battery as illustrated in the following instructions.
1. Make sure that the power switch is in the OFF position and the
instrument’s power adapter is not connected.
To Next Page
Loading...
