Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-14
248083400-1 Rev 7
DATA SETUP Figure 4-17 displays the Data Setup option buttons. These options
allow the user to configure the parameters for data collection during a
sample.
Figure 4-17 Data Setup Options
Particle Channels
The instrument’s particle channels can be enabled or disabled on the
Particle Channel. A checkmark is displayed next to each enabled
channel as shown in Figure 4-18.
Figure 4-18 Particle Channel Configuration
Note: The data buffer is
cleared when channels are
enabled or disabled. This
ensures that all of the data
in the buffer will have the
same number of channels.
• The checkmark button next to each channel size is a toggle. Press it
once to disable a channel and a red “X” will display, indicating that
the channel is disabled. Press the button again and it will change
back to the checkmark, enabling the channel.
To Next Page
Loading...
