Operation
248083400-1 Rev 7
4-37
OUTPUT SETUP
The Print configuration has several options for printing the data that the
user sets on the Printer Setup screen shown in Figure 4-46.
Figure 4-46 Printer Setup Screen
• Output on Sample / Output on Alarm - When Output on
Sample is enabled, a single record will print at the end of every
sample.
When Output on Alarm is enabled, a single record printout will
print at the end of any sample that experiences an alarm condition.
• Model Name - When enabled, the Model name of the instrument
will print in the header of all printouts.
• Serial Number - When enabled, the Serial Number of the
instrument will print in the header of all printouts.
• Separator - When enabled, a line separator will print after the
Model Name and Serial Number in the header of all printouts.
Note:
You can select
both Differential and
Cumulative printing at the
same time. For normalized
values with more than 8
digits, only the whole
number will be printed.
• Differential / Cumulative Toggle - This toggle option specifies
how the data will appear on the printouts.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.
To Next Page
Loading...
