Operation
248083400-1 Rev 7
4-15
• Pressing MAIN or BACK will prompt to clear all collected data as
shown in Figure 4-19.
Figure 4-19 Clear Data Screen
• From this screen, press CANCEL to cancel changes and return to
the Configuration screen.
When channels are disabled, they are removed from the MAIN screen
display, from the reports, and from the printouts.
The channel size for disabled channel(s) remain in the Data screen,
however the instrument does not record data for disabled channels.
Analog Channels
A Temperature and Relative Humidity probe can be connected to the
HANDHELD via a connector on the top of the unit.
Users can select if the HANDHELD displays analog temperature data
as Fahrenheit or Celsius by pressing the ANALOG button on the
Configuration screen. The Select Temperature Units window displays.
There are two buttons on the Select Temperature Units window. The
button displayed shows the units that are currently selected: F for
Fahrenheit and C for Celsius.
To Next Page
Loading...
