Lighthouse Handheld 2016 - Security

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-38
248083400-1 Rev 7
SECURITY
To restrict access to the instrument and/or configuring the instrument,
the HANDHELD has two different password levels. See Figure 4-47.
Figure 4-47 Security Password Configuration Screen
To restrict who can operate the instrument, enable the POWER ON
password. When the POWER ON password is enabled, in order to use
the instrument the user will be required to enter the correct password
each time the instrument is turned on.
To restrict who can configure the instrument, enable the Configuration
(CFG) password. When the Configuration password is enabled, the
user will be required to enter the correct password before they can
access the Configuration screen.
• To set the password for the POWER ON, select the POWER ON
button, then type in a password using the numeric keypad. Press the
ERASE button to delete the last character, if needed.
• Press ENTER to save.
• To set the Configuration (CFG) password, select the CFG button,
then type in a password using the numeric keypad.
• Press the ERASE button to delete the last character, if needed.
• Press ENTER to save the changes.
• Press the “X” button to enable either or both passwords.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.