Operation
248083400-1 Rev 7
4-13
Press the MAIN button, then tap in the data area to go into the Zoomed
View. See Figure 4-15.
Figure 4-15 Zoomed View with Only Cumulative Data
Only one column of data is displayed.
CONFIGURATION
Screen
Press CONFIG on the MAIN screen to display the Configuration
screen as shown inFigure 4-16 .
Figure 4-16 Configuration Screen
Data Setup includes buttons to enable/disable particle channels,
configure analog temperature readings, set sample record parameters,
sample settings, thresholds, enable/disable alarms, and clear the data
buffer.
Device Setup includes buttons to configure the instrument’s date and
time, set the LCD contrast, adjust the instrument’s beep volume, enable
the instrument to AutoStart, set it to display only one channel of data,
enable 1 Second Output, set the instrument’s communication address,
enabling print functions, enable password restrictions, and/or (with
proper authorization) adjust service settings.
To Next Page
Loading...
