Lighthouse Handheld 2016 - Comm Address

Lighthouse HANDHELD 2016, 3016, 5016 Gen F Operating Manual
4-36
248083400-1 Rev 7
COMM ADDRESS
When the HANDHELD is connected to a data collection system or
daisy chained at the end of a chain of RS-485 instruments, the
instrument’s COMM address is used to identify it.
LMS XChange or LMS Express/RT will search for the instrument by
the COMM Address specified on the Communication screen shown
below. COMM addresses range from 1 to 63.
For RS-485 communications, each device on a multi-port chain must
have a unique address.
Figure 4-45 COMM Address Configuration screen
Set the COMM Address by using the numeric keypad to select the
address; press ERASE to erase a number, if needed. Press ENTER to
accept the value. See Figure 4-45.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.