Unpacking, Inspecting and Installation
248083400-1 Rev 7
3-5
Figure 3-3 Insert Battery into Battery Compartment
5. Tuck the battery release ribbon over the battery. See Figure 3-4.
Figure 3-4 Tuck Battery Release Ribbon
6. Close the door so that it is flush with the bottom of the
HANDHELD as shown in Figure 3-5.
Figure 3-5 Close the Battery Compartment Door
7. Slide the battery compartment door to the right until it clicks and
latches. See Figure 3-6.
To Next Page
Loading...
