Operation
248083400-1 Rev 7
4-31
WARNING: Be
careful to touch the
screen at the specified
locations only. If
touching the screen
elsewhere during this
process, the screen will
be incorrectly aligned.
• The screen in Figure 4-38 appears. Touch anywhere on the screen
to continue calibration.
Figure 4-38 Alignment Screen 1
Note:
Using a PDA Stylus
provides higher accuracy to
the touch screen interface.
• At the next screen, touch the arrow displayed in the upper right
corner. This needs to be done a total of three times before
continuing to the next alignment. See Figure 4-39.
Figure 4-39 Alignment Screen 2
To Next Page
Loading...
