LightLas 532 – Operator's Manual Rev. No 01 Page 53 of 115
Console Carrying Case LDU Carrying Case (Optional)
Figure 5.2 Portable Carry Cases for Console and LDU’s
Upon receiving the system inspect the packing carton for any signs of mishandling,
which must be reported to the freight handler before the instrument is unpacked. If
there is damage, then the manufacturer reserves the right to decline any warranty
claims that may be forthcoming so it is essential that the freight company will take
full responsibility for any damages.
If the outer cardboard packaging looks OK then you can proceed to remove the
internal packed assemblies (refer to Fig. 5.1). The contents of each layer are:
1. The top layer is just a protection layer.
2. The middle layer contains the Chinrest and Integrated LDU including the
Zoom assembly, binoculars, eyepieces, target rod, target plate, cross-slide
shaft and gears, gear covers, spare lamp, manual, mains power cable.
3. The bottom layer part contains the table top.
The packing checklist is used to confirm the individual layer contents and notify the
manufacturer if any discrepancy. The motorized table is an optional and may be
purchased from the manufacturer.
To Next Page
Loading...
