LightLas 532 – Operator's Manual Rev. No 01 Page 54 of 115
5.3 Tools and Equipment
In order to be able to effectively carry out a full initial installation of the Green Laser
System the following tools and equipment are required and available from the
manufacturer:
1. Laser Power Meter (to measure from 0 to 2 watts CW)
2. Optical Alignment tool kit, which includes:
Model Eye
Laser target tool
3. Photographic thermal paper (Zap-it or equivalent)
4. Set of metric Allen keys
5. Screwdrivers (Philips / Roberson)
It is both essential and mandatory to have the all above listed tools and equipment in
order to assemble or disassemble Lightlas in a correct and safe way
To Next Page
Loading...
