Note: Keep the outside of the windshield
clean. The rain sensor is very sensitive and
the wipers may operate if dirt, mist or insects
hit the windshield.
AUTOWIPERS SETTINGS
1. From the settings menu, press Vehicle.
2. Press Wipers.
3. Switch Rain sensing on or off.
Note: When you switch the feature off, the
wipers do not operate based on the rain
sensor. When you switch on the windshield
wipers to the intermittent wipe position with
the feature off, the wipers use the wipe
speed set by the rotary control.
ADJUSTING THE SENSITIVITY OF THE
RAIN SENSOR
High sensitivity.A
Low sensitivity.B
Use the rotary control to set the sensitivity
of the rain sensor.
When you select high sensitivity, the wipers
operate when the sensor detects a small
amount of water on the windshield.
When you select low sensitivity, the wipers
operate when the sensor detects a large
amount of water on the windshield.
SWITCHING THE REAR WINDOW
WIPER ON AND OFF
Rear window wiper off.A
Intermittent wipe.B
Continuous wipe.C
105
Nautilus (CFG) Canada/Mexico/United States of America, enUSA, Edition date: 202405, DOM
Wipers and Washers
To Next Page
Loading...
