Service Training
2.6.7.2.1 Operation of speed sensor 2B8 67
2.6.8 Fans 68
2.6.8.1 Fan method of operation until series 6/95 68
2.6.8.2 Fan method of operation from series 7/95 69
2.6.9 Location of connectors 70
2.6.9.1 Location of connectors to series 6/95 70
2.6.9.2 Location of connectors from series 7/95 72
2.6.10 Combined instrument 75
2.6.10.1 Indicator lights 75
2.6.10.1.1 Field weakening active indicator light (option) 76
2.6.10.1.2 Turn signal indicator light (from series 7/95) 76
2.6.10.1.3 Parking brake warning light (from series 12/94) 76
2.6.10.1.4 Brake shoe warning light (option) 76
2.6.10.1.5 Motor brush warning light 76
2.6.10.1.6 Engine temperature warning light (from series 7/95) 76
2.6.10.1.7 Travel direction indicator (option) 77
2.6.10.1.8 Hydraulic oil temperature warning light (option) 77
2.6.10.1.9 Hydraulic oil level warning light (option) 77
2.6.10.1.10 Fan warning light (from series 7/95) 77
2.6.10.1.11 Service interval indicator light 77
2.6.10.2 Battery discharge indicator 78
2.6.11 Linde Diagnostic Unit 80
2.6.11.1 Operation of the diagnostic unit in connection with the combined instrument 82
2.6.11.1.1 Programming of menu functions 11 to 24 84
2.6.11.1.2 Resetting the service interval indicator with menu function 31 85
2.6.11.1.3 Programming and reading the service hour menu functions 32 to 35 86
2.6.11.1.4 Read-out functions with menu functions 41 to 43 87
2.6.12 Brush monitoring 88
2.6.12.1 Traction motor switching contacts 89
2.6.12.2 Working hydraulics pump motor switching contacts 89
2.6.13 Wiring diagram 90
2.6.13.1 Wiring diagram to series 6/95 90
2.6.13.2 Wiring diagram from series 7/95 92
2.7 Hydraulic system 1
2.7.1 Hydraulic pump motor 1
2.7.2 Renewing the hydraulic pump motor brushes 1
To Next Page
Loading...
