5 Maintenance
Engine
Engine
Checking the engine oil level
ENVIRONMENT NOTE
Observe information regarding working with
consumables
WARNING
When topping up the oil, no oil should
drip on to hot engine parts — Risk of
fire!
Fill carefully.
CAUTION
Different oil specifications.
Observe the recommendations for consumables.
CAUTION
The oil level should never be above the upper mark.
Drain engine oil if necessary.
¾ Park the forklift truck on level ground.
¾ Open the bonnet.
¾ Take the oil dipstick (2) out of the engine.
¾ Wipe the oil dipstick with a clean cloth.
¾ Push the oil dipstick fully back in and
remove it again.
Oil level should be between the marks.
¾ If necessary, pour in engine oil through the
filling opening until it reaches the upper
dipstick mark.
¾ To do so, remove filler cap (1) from the filling
opening.
Difference in quantity between max. and min.
marks: 1.0 l.
¾ Fit filler cap and turn to tighten.
¾ Close the bonnet.
120 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
