5 Maintenance
Self-help
If the engine does not start straightaway, abort
the starting process after 10 seconds and try
again after around 30 seconds.
¾ Once the engine is running, first disconnect
the negative cable (4) from the engine block
(3), and then from the current-giving battery
(5).
¾ First disconnect the positi
ve cable (1) from
the current-giving battery
(5), then from the
discharged battery (2).
Towing
If the truck needs to be to
wed away in an
emergency, the towing un
it can:
• short-circuiting of hydraulic oil circuit
• Release the multi-disc brakes in the drive
axle via the brake valve the and stop pedal.
WARNING
It is no longer possible to brake the truck. The
parking brake does not operate either.
To tow the forklift truck, a towing vehicle with
sufficient pulling and braking force for the unbraked
towed load is required. It is only permitted to tow
thetruckusingafixedconnection(towingbar).
Towing process
¾ Lower the load so far that the fork arms do
not scrape on the ground while towing.
¾ Remove load.
¾ Attach towing vehicle (ensure sufficient
pulling and braking force) to the truck’s
towing pin using the towing bar.
Opening the hydraulic system shorting
plunger
¾ Open the bonnet.
202 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
