Operation 4
Standard equipment
¾ Press both push buttons (2) and (3) simulta-
neously for 3 seconds.
The hour readout in the time display (1)blinks.
NOTE
The hours or minutes can be adjusted gradu-
ally by pressing push button (2) or quickly by
holding down the push button.
¾ Depress button (2) to set the hours.
¾ Depress button (3) to confi
rm the hour
setting.
Now the minute readout blinks.
¾ Depress button (2) to set the minutes
¾ Depress button (3) to co
nfirm the setting of
the minutes.
Seat belt
DANGER
There is a risk to life if the driver
leaves the vehicle in an uncontrolled
manner.
For this reason, the seat belt must
always be worn when operating the
truck! The seat belt should only be
worn by one person.
WARNING
The seat belt must function perfectly.
For this reason, the belt should not become twi-
sted, trapped or tangled. The belt buckle and belt
retractor should be protected from foreign bodies,
damage and dirt.
NOTE
Driver’s cabs with fixed closed doors or
bracket doors meet the safety requirements
for driver restraint systems. The seat belt may
also be used. It must, however, be fastened
when driving with doors that are open or have
been removed. PVC doors do not constitute
a driver restraint system. For trucks with the
Operating Instructions – 394 807 10 01 EN – 07/2011 41
To Next Page
Loading...
