Maintenance 5
Load lift system
d3941343
Cleaning and spraying the lift mast
chain
DANGER
Lift mast chains are safety elements. Incorrect
cleaning materials may cause direct damage to
chains.
Do not use cleaner solvent, chemical cleaners or
fluids that are corrosive or contain acid or chlorine.
If the lift mast chain is so dusty that penetration
of the lubricating oil is not ensured, the chain
must be cleaned.
¾ Place a collection container under the lift
mast.
¾ Clean lift mast chain with paraffin deriva-
tives, such as benzine.
Take note of the manufacturer’s safety infor-
mation. When cleaning with a steam jet, do
not use additives.
¾ After cleaning, immediately use com-
pressed air to remove any water remaining
on the surface of the chain and in the chain
joints.
The chain should be moved several times
during this process.
¾ Immediately apply Linde chain spray to
chain, moving chain while doing so.
Operating Instructions – 394 807 10 01 EN – 07/2011 185
To Next Page
Loading...
