5 Maintenance
Self-help
Engine oil pressure too low. Switch off engine immediately.
Possible cause
Remedy
Leakages in the lubricating s
ystem.
Contact your authorised dealer.
Oil level too low
Top up with engine oil
Charging current indicator lamp lights up during operation.
Possible cause
Remedy
Three-phase alternator speed too low.
Check V-ribbed belt tensio
n.
Three-phase alternator fails to charge the
battery, three-phase alternator or cut-out relay
defective.
Contact your authorised dealer
Truck only moves at creep speed, the buzzer sounds and error code X201 is displayed in the
text field of the display unit.
Possible cause
Remedy
Engine oil level too low. Top up engine oil.
Truck only moves at creep speed, the buzzer sounds and error code X202 is displayed in the
text field of the display unit.
Possible cause
Remedy
Engine oil pressure too low.
Top up engine oil, if the error persists, contact
your authorised dealer.
Truck only moves at creep speed, the buzzer sounds and error code X203 is displayed in the
text field of the display unit.
Possible cause
Remedy
Coolant level too low.
Top up coolant.
The truck only moves at creep speed and the level display lights up in the display unit.
Possible cause
Remedy
Coolant level
too low.
Top up coolant.
Truck only moves at creep speed, the buzzer sounds and error code X204 is displayed in the
text field of the display unit.
Possible ca
use
Remedy
Engine temperature too high.
Top up coolant. Water pump defective. Clean
the water cooler. Adjust the fuel injection
system.
198 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
