4 Operation
Standard equipment
Adjusting the seat angle
¾ Pull lever (3) upwards.
The seat surface is moved to the
desired
position by applying pressure
to the seat
surface or removing pressure f
rom it.
Adjusting the seat depth
¾ Pull lever (4) upwards.
The seat surface can be moved to the desired
position by sliding the seat surface forwards or
backwards.
Adjusting the backrest extension
¾ Push backrest extensio
n (5) in or pull it out
for individual adjustm
ent.
Adjusting the lumbar su
pport
NOTE
The lumbar support enables optimum configu-
ration of the seat back contour to the driver’s
body.
¾ Press button (6).
The extent to which the upper area of the
backrest is curved is adjusted individually.
¾ Press button (7).
The extent to which the lower area of the
backrest is curved is adjusted individually.
Activating the seat heater (luxury driver’s
seat)
¾ Push the switch (8) downwards to activate
the seat heater.
¾ Push the switch (8) upwards to deactivate
the seat heater.
NOTE
The maximum temperature is predefined.
38 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
