Operating manual and inspection booklet
Overview
100 3435216
Gas bottle locker
Fig. 70: Example of a gas bottle locker
Depending on the model and the selected vehicle equipment, the
gas bottle locker can be found along the side of the motor home
or the rear of the vehicle. A safety strap to secure the gas bottle
is installed inside the locker. If requested, a second gas bottle
safety strap can be retrofitted.
A pressure control valve is also installed inside the gas bottle
locker. This control valve connects the gas system with the motor
vehicle.
Upon request, a set of gas pressure control valves
with automatic changeover function can be installed
inside the gas bottle locker.
Only tighten the gas pressure control valve manually – never
attempt to use a tool or other instruments – otherwise, the
seal may be damaged. The connection uses a left-handed
thread!
The valves of all gas bottles carried inside the vehicle must be
closed prior to fuelling and other extended stays (e.g., when
not using the motor home).
To Next Page
Loading...