WSDA
®
-2000 User Manual
4.2 Data Options Menu
The Data category provides data handling options such as selecting which data is sent to the
CANJ1939 bus, uploaded to SensorCloud™, and downloaded to a host computer. Data can also be
cleared from the WSDA-2000 internal memory.
Table 3 - Data Menus
provides a summary of the
menus under the Data category.
Menu Description
J1939
Enable and select what sensor data is sent out in CANJ1939 format
and what method is used
Upload Filter
Select which sensor nodes and channels are uploaded to
SensorCloud™
Calibration
Apply calibration conversions values and select
measurement display units before downloading saved data
Clear Data
Erase data from the gateway flash memory
Table 3 - Data Menus
Nomenclature for node address, channel assignments, and other data are used in some of the Data
menus.
Table 4 - Data Nomenclature
describes the required naming conventions for these
assignments. Node information found in the Node List are also annotated this way (
see Node List on
page 20
).
Field Description Nomenclature Examples
Address
Node address assigned when the node is
manufactured. Provided with the node
and displayed in SensorConnect when
connected
decimal number 31463
Channel
Channel List
Payload
Data and packet value aliases such as for
node address, node channel number,
radio strength, and protocol values. Chan-
nel number assignment is handled in
SensorConnect. All other aliases are
fixed (
see Data Alias Definitions on page
29
).
lower case text
followed by a num-
ber. In a channel
list multiple values
are separated by a
comma or space
ch1
ch1,ch2,ch5,
bin1, rssi
ch2 angleid
Table 4 - Data Nomenclature
21
To Next Page
Loading...
