WSDA
®
-2000 User Manual
4.3.1 Diagnostics
The diagnostics feature is used to troubleshoot the WSDA-2000. The diagnostics window displays
a report from the gateway internal log file. The log records the diagnostic checks from three possible
sources of error: the timing engine, SensorCloud™ data upload, and the data logger. These
diagnostic checks are performed once at every power up and then periodically as the gateway is in
on. If errors are reported in the Diagnostics menu, contact LORD Sensing Technical Support (
see
Technical Support on page 78
).
Figure 20 - Diagnostics Menu
NOTE
If SensorCloud™ Data Upload, J1939, or Data Logging are disabled (in the
Tools > Configuration menu) they will not be checked during the diagnostics
routine.
35
To Next Page
Loading...
