Face Detection12
5. Click View Settings next to Select Area to configure which areas of the image will target
faces.
6. Click Setup next to Schedule to choose which days and times of the week to enable face
detection:
• Click or click-and-drag along the each of the blue timelines to quickly add or remove time
from each day’s schedule in 15–minute segments.
• Click
beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click
. This will allow you to set exact start
and end times for a schedule.
#LX400111; r. 5.0/56647/56647; en-US 38
To Next Page
Loading...
