Using the Main Menu15
8. Storage: Configure recording schedule and set preferences for hard drives connected to the
system.
9. Account: Modify account details, such as account username or permissions.
15.2 Playback
See chapter 9 Playback, page 23 for details.
15.3 Events
Set preferences for events such as video loss, motion detection, Person/Vehicle detection, Face
Detection, Face Recognition, and system warnings. The Events menu is also used to set preferen-
ces for deterrence cameras.
15.3.1 Video Loss
Configure video loss settings and how the system reacts to a video loss event. Video loss means
that video from one or more cameras was interrupted or disabled. It could be caused by a number
of factors, such as a loose or damaged connection, loss of power to a camera, or a blocked camera
lens.
To configure video loss settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click EVENTS. Click the Event Settings tab on the side panel, then Video Loss on the top
panel.
3. Select a channel to configure.
4. Click to enable (
) / disable ( ) video loss events for the selected channel.
#LX400111; r. 5.0/56647/56647; en-US 54
To Next Page
Loading...
Need help?
General
