Using the Main Menu15
2. Click STORAGE, then click the HDD Manager tab.
3. Check the hard drive you want to format.
4. Click Format. The system will restart to complete the formatting process.
15.9.6 Configuring Hard Drive Type
The system supports the following hard drive types:
• Read-write HDD: Normal recording hard drive.
• Read-only HDD: The system can playback data from this hard drive, but it will not record to it.
To configure hard drive types:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click STORAGE, then click the HDD Manager tab.
3. Under Type next to the hard drive you want to configure, select Read/Write or Read only.
4. Click Apply.
15.9.7 Recording Calculator (REC Estimate)
Use the recording calculator to get an estimate of your maximum recording time in days for the in-
stalled hard drive, or how much hard drive space would be required to retain a specific amount of
days.
#LX400111; r. 5.0/56647/56647; en-US 81
To Next Page
Loading...
Need help?
General
