Using the Main Menu13
1. From the live viewing screen, click > Advanced > Maintenance.
2. Click IPC Upgrade.
3. The drive menu appears. Navigate to and select the .bin firmware file, then click OK.
4. A confirmation window appears. Click OK to confirm.
5. Allow 5-10 minutes for the system to upgrade and reboot.
CAUTION
Do not power off the recorder or disconnect cameras during firmware upgrade.
13.4.6 Configuring System Warning Settings
Set preferences for system warnings including video loss, hard drive errors, and warnings when
the hard drive is full.
To configure system warning settings:
#LX400115; r. 3.0/57178/57178; en-US 63
To Next Page
Loading...
Need help?
General
