Using the Main Menu13
4. Click Setup next to OSD Position. Click-and-drag the channel name to reposition it.
5. Click Save.
13.2.2 Enabling / Disabling Cameras
Enable or disable wire-free cameras.
NOTE
Disabled cameras will not show video during live viewing or record video to the hard drive.
To enable / disable cameras:
1. From the live viewing screen, click
> Settings > Camera > Camera Setup.
2. Select the channel for the camera you want to enable / disable.
3. Select ON or OFF.
4. Click Save.
13.2.3 Camera Firmware
In order to troubleshoot certain issues, technical support may ask you for the firmware version
of your wire-free cameras. Use the procedure below to determine the current version.
To check camera firmware:
#LX400115; r. 3.0/57178/57178; en-US 44
To Next Page
Loading...
Need help?
General
