Need help?Do you have a question about the LPKF MultiPress S and is the answer not in the manual?
General| Category | Lamination press |
|---|---|
| Max Temperature | 200°C |
| Control | Touchscreen interface |
| Temperature Range | 20 °C - 200 °C |
| Heating Method | Electrically heated plates |
| Control System | PLC |
| Cooling | Water cooling |
| Power Supply | 50/60 Hz |
Describes the main operating units and connecting elements of the MultiPress S.
Details the components and operation of the automatic hydraulic pump.
Explains the features and operation of the hand pump.
Lists included accessories and recommended consumables for the press.
Guidelines for safely positioning and installing the press unit.
Steps for connecting either the automatic or hand hydraulic pump.
Initial setup steps including power connection and basic function checks.
Instructions for verifying the functionality of machine safety features.
Discusses approved materials and their storage for pressing.
Instructions for assembling the multilayer stack in the press mold.
Explains the concept and types of press profiles used in the process.
Describes the sequence and parameters of heating and pressing operations.
Steps for powering up and preparing the MultiPress S for operation.
Guide to navigating and controlling the machine via the LCD display and keys.
Procedure for configuring fundamental machine settings like language and preheating.
How to choose existing press profiles and modify their parameters.
Steps to initiate a pressing cycle using a selected press profile.
Procedures for preparing and loading materials into the press mold.
Steps for safely removing the pressed multilayer after the cycle is complete.
Detailed guide on using the manual hand pump for pressure control.
Provides a list of error codes, their explanations, and solutions.
Instructions for cleaning the machine surfaces, press mold, and sheets.
Procedures for routine checks of the machine's condition and safety features.
Guidelines for scheduled maintenance and overhauling of the hydraulic pumps.
Lists LPKF's multilayer materials and consumables.
Provides a table for logging individual configuration settings for press profiles.
To Next Page