Operation
MultiPress S Operating manual 3.0 Rev 3.6.2009 39
6.2.3 Selecting menu entries
After switching on, the press displays the main menu containing the
entries Start, Setup, Profiles and Service.
Displaying the main menu
› If the main menu ("menue“) is not displayed, press the ESC key
repeatedly until "menue" appears in the menu box.
Selecting a menu item
› Press the Up or Down key repeatedly until the desired menu item
appears in the selection box.
› Press the ENT key, to confirm the menu selection.
The selected menu item is displayed in the menu box. The selection
box displays additional menu items, which again can be activated by
selecting and confirming them.
Canceling the selection
› To cancel a menu selection and return to the selection menu, press
the ESC key.
To Next Page
Loading...