Operation
MultiPress S Operating manual 3.0 Rev 3.6.2009 55
6.9 Switching the machine off
Before switching the machine off at the main switch, make sure that the
system is depressurized.
› Finish any program that may still be running (see "Canceling/Quitting
the program" on page 48).
For the MultiPress S with automatic hydraulic pump, the pressure is
released program-controlled.
› For the MultiPress S with hand pump:
– Make sure that the manometer shows 0 bar/psi.
It may be necessary to let down the pressure by rotating the
handwheel on the pump counter clockwise.
– To close the pressure relief valve, rotate the handwheel clockwise
as far as it will go.
› Switch the main switch on the rear of the MultiPress S to the
position O.
The display expires.
To Next Page
Loading...