LPKF MultiPress S - Individual profile settings

Appendix
72 MultiPress S Operating manual 3.0 Rev: 3.6.2009
12.2 Individual profile settings
Here you can notice your individual settings for the freely definable
profiles 1 – 6.
Tab. 6: Individual configuration of the press profiles
Profile name
Use
Preheating temperature Prepressing temperature Main pressing temperature Prepressing time Main pressing time Prepressing force Main pressing force Width Height
LPKF Set
LPKF base materials in the
standard format
(This profile is unchangeable)
250 °C 180 °C 180 °C 10 min 60 min 80
N/cm²
150
N/cm²
275 mm 200
Pofiles 1 - 6
(Presettings)
250 °C 180 °C 180 °C 10 min 30 min 80
N/cm²
150
N/cm²
275 mm 200 mm
Profile 1
Use:
Profile 2
Use:
Profile 3
Use:
Profile 4
Use:
Profile 5
Use:
Profile 6
Use: